Digital High Pressure Heat Press Machine
Product Description
Features:
1) Solid steel welded framework
2) Digital temperature and time setting
3) Easy to use open and close handle
4) Extra thick heat platen enables high pressure
5) Scratch-Resistant, baked on powder coat
Technical Parameter:
1) Voltage: 100 - 120V/ 220 ¨C 240V
2) Heat Platen: 38 X 38cm, 40 x 50cm, 40 x 60cm
3) Temperature Range: 0-399¡æ (+/- 5 deg)
4) Time Range: 0-999 seconds.
Manual:
Put a T-shirt in the machine. put the printed sublimation paper on the t-shirt properly.
1. Get ready on the power, press the power button , the indicator is lighted!
2. Adjust the temperature (170¡æ~190¡æ) and time (about 8 seconds). When the temperature reaches the right degree, the indicator on the top of the temperature-adjuster switch off.
3. Put the heating flat down (please note the right surface of the paper). Please note that the pressure should be no too much, or too little!
4. When the temperature gets to the set time, the buzzer rings (please turn off the button and raise the handspike and take out the t-shirt.
5.Take off the paper from the t-shirt a.s.a.p. if too slow, the paper will stick to the t-shirt, and hard to get off. Then put the printed t-shirt into water for a while. Now an individual t-shirt is made by you!
Manual
Our Continuous Ink System can save you more money.
Continuous Ink System
1) Solid steel welded framework
2) Digital temperature and time setting
3) Easy to use open and close handle
4) Extra thick heat platen enables high pressure
5) Scratch-Resistant, baked on powder coat
Technical Parameter:
1) Voltage: 100 - 120V/ 220 ¨C 240V
2) Heat Platen: 38 X 38cm, 40 x 50cm, 40 x 60cm
3) Temperature Range: 0-399¡æ (+/- 5 deg)
4) Time Range: 0-999 seconds.
Manual:
Put a T-shirt in the machine. put the printed sublimation paper on the t-shirt properly.
1. Get ready on the power, press the power button , the indicator is lighted!
2. Adjust the temperature (170¡æ~190¡æ) and time (about 8 seconds). When the temperature reaches the right degree, the indicator on the top of the temperature-adjuster switch off.
3. Put the heating flat down (please note the right surface of the paper). Please note that the pressure should be no too much, or too little!
4. When the temperature gets to the set time, the buzzer rings (please turn off the button and raise the handspike and take out the t-shirt.
5.Take off the paper from the t-shirt a.s.a.p. if too slow, the paper will stick to the t-shirt, and hard to get off. Then put the printed t-shirt into water for a while. Now an individual t-shirt is made by you!
Manual
Our Continuous Ink System can save you more money.
Continuous Ink System